*PLASTIC
Data lines for HARDENING=COMBINED with DATA TYPE=STABILIZED:
First line:
1. Yield stress.
2. Pl astic strain.
3. Strain range.
4. Temperature.
5. Firstfield variable.
6. Second field variable.
7. Etc., up to four field variables.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater thanfour):
1. Fifthfield variable.
2. Etc.,up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the dependence of yield stress on plastic
strain and, if needed, on strain range, temperature,and other predefined field variables.
Data lines for HARDENING=COMBINED with DATA TYPE=PARAMETERS:
First line:
1. Yieldstress at zero plastic strain.
2. Kinematichardening parameter, C.
3. Kinematichardening parameter, .
4. Temperature.
5. Firstfield variable.
6. Second field variable.
7. Etc., up to four field variables.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater thanfour):
1. Fifthfield variable.
2. Etc.,up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the dependence of yield stress and
kinematic hardening parameter Con temperatureand other predefined field variables. cannot depend
on temperature and predefined field variables.
Data lines for HARDENING=KINEMATIC:
First line:
1. Yield stress.
16.12–3
ABAQUS Version 6.1 Module: ID:
Printed on: