*INTEGRATED OUTPUT SECTION
9.21 *INTEGRATEDOUTPUT SECTION: Define an integrated output section over a surface
with a local coordinate system and a reference point.
Thisoption is used to associate a surface with a coordinate system and/or a reference node totrack the average
motion of the surface. It can also be used in conjunction with an integrated output request toobtain output of
quantities integrated over a surface.
Product: ABAQUS/Explicit
Type: Model data
Level: Part, Part instance, Assembly
References:
•“Integrated output section definition,” Section 2.5.1 of the ABAQUS An alysis User’s Manual
•“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User ’sManual
•*INTEGRATEDOUTPUT
•*SURFACE
Required parameters:
NAME
Set this parameter equal to a label that will be usedto refer to the integrated output section.
SURFACE
Set this parameter equal to the name of the surface (see “Defining element-based surfaces,”
Section 2.3.2 of the ABAQUS Analysis User’sManual) to be associated with the integrated output
section.
Optional parameters:
ORIENTATION
Set this parameter equal to the name of an orientation definition (“Orientations,” Section 2.2.5of
the ABAQUS Analysis User’s Manual) to define the initial coordinate system for the s ection. This
initial system can be further modified by using the PROJECT ORIENTATION parameter.
If this parameter is omitted, the global coordinate system isused.
POSITION
This parameter is relevant only if the REF NODE parameter is included.
Set POSITION=INPUT (default) if the location of the reference node is to be define db y the
user.
9.21–1
ABAQUS Version 6.1 Module: ID:
Printed on: