3D Connexion Version 6.6 - page 554

*TENSION STIFFENING
4. Firstfield variable.
5. Second field variable.
6. Etc.,uptofivefieldvariables.
The first point at each value of temperature must be a stress fractionof 1.0 at a strain of 0.0.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greaterthan five):
1. Sixthfield variable.
2. Etc.,up to eight field variables per line.
Repeat thisset of data lines as often as necessar y to define the dependence of the postcrackingbehavior
on temperature and other predefined field variables.
Data lines if the parameter TYPE=DISPLACEMENT isincluded:
First line:
1. Displacement, , at which a linear loss of strength after crackinggives zero stress. (Unitsof
L.)
2. Temperature.
3. Firstfield variable.
4. Second field variable.
5. Etc., up to six field variables.
Subsequent lines (only needed if the DEPENDENCIES parameterhas a value greater than six):
1. Seventhfield variable.
2. Etc.,up to eight field variables per line.
Repeat thisset of data lines as often as necessar y to define the dependence of the postcrackingbehavior
on temperature and other predefined field variables.
19.3–2
ABAQUS Version 6.1 Module: ID:
Printed on: