*PIPE-SOIL STIFFNESS
Subsequent lines (only needed if the DEPENDENCIES parameterhas a value greater than three):
1. Fourth field variable.
2. Etc.,up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the parameters forthe ASCE formulae as a
function of temperature and other predefined field variables.
Data lines to define constitutive behavior usingthe ASCE formula for sand in the horizontal
direction (TYPE=SAND,DIRECTION=HORIZONTAL):
First line:
1. Horizontalbearing capacity factor, .
2. Ultimaterelative displacement, .
3. Temperature.
4. Firstfield variable.
5. Second field variable.
6. Etc.,up to five field variables per line.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greaterthan five):
1. Sixthfield variable.
2. Etc.,up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the parameters forthe ASCE formulae as a
function of temperature and other predefined field variables.
Data lines to define constitutive behavior using the ASCE formulafor clay in the horizontal
direction (TYPE=CLAY, DIRECTION=HORIZONTAL):
First line:
1. Horizontalbearing capacity factor, .
2. Ultimaterelative displacement, .
3. Temperature.
4. Firstfield variable.
5. Second field variable.
6. Etc.,up to five field variables per line.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greaterthan five):
1. Sixthfield variable.
2. Etc.,up to eight field variables per line.
Repeat this set of data lines as often as necessary to define parameters for the ASCE formulaeas a
function of temperature and other predefined field variables.
16.10–5
ABAQUS Version 6.1 Module: ID:
Printed on: