*IMPEDANCE
Optional parameter:
OP
Set OP=MOD (default) to modify existing impedances or to defi ne additional impedances.
Set OP=NEW if all existing impedances applied to the model should be removed. To remove
only selected impedances, use OP=NEW and respecify allim pedancesthat are to be retained.
Data line to define an impedance for PROPERTY,NONREFLECTING=PLANAR, or
NONREFLECTING=IMPROVED:
First (and only) line:
1. Elementnum beror elem ent set label.
2. Surfaceimpedance type label, In, for impe dance on face n.
Data line to define an absorbing boundary impedance for NONREFLECTING=CIRCULAR or
NONREFLECTING=SPHERICAL:
First (and only) line:
1. Elementnum beror elem ent set label.
2. Surfaceimpedance type label, In, for impe dance on face n.
3. , the radius of the circleor sphere defining the absorbing boundary surface.
Data line to define an absorbing boundary impedance for NONREFLECTING=ELLIPTICAL or
NONREFLECTING=PROLATESPHEROIDAL:
First (and only) line:
1. Elementnum beror elem ent set label.
2. Surfaceimpedance type label, In, for impe dance on face n.
3. Thesem imajor axis, a, of theellipse or prolate spheroid defining the surface. ais 1/2 of the
maximum distance between two points on the ellipseor spheroid, analogous to the radius of a
circle or sphere.
4. The eccentricity, , of the ellipse or prolate spheroid. The eccentricity is the square root of
one minus the square of the ratio of the semiminor axis, b, to the semimajor axis, a:
.
5. Global X-coordinate of the center of the ellipse or prolate spheroid defining the radiating
surface.
6. Global Y-coordinate of the center of the ellipse or prolate spheroid defining the radiating
surface.
7. Global Z-coordinate of the center of the ellipse or pr olate spheroid defining the radiating
surface.
9.1–2
ABAQUS Version 6.1 Module: ID:
Printed on: