*THERMAL EXPANSION
19.4 *THERMAL EXPANSION: Definethe thermal expansion behavior of beams.
This option can be used only in conjunction with the *BEAM GENERAL SECTION,
SECTION=NONLINEAR GENERAL option.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Part, Part instance
References:
•“Using a general beam section to define thesection behavior,” Section 23.3.7 of the ABAQUS Analysis
User’s Manual
•*BEAM GENERAL SECTION
Optional parameter:
DEPENDENCIES
Set this parameter equal to the number of field variable dependencies for the thermal-expansion
coefficient, in addition to temperature. If this parameter is omitted, it is assumed that the thermal-
expansion coefficient is constant or depends only on temperature. See “Specifying field variable
dependence”in “Material data definition,” Section 16.1.2 of the ABAQUS Analysis User’s Manual,
for more information.
Data lines to define the thermal expansion behavior:
First line:
1. Coefficient of thermal expansion.
2. Temperature.
3. Firstfield variable.
4. Second field variable.
5. Etc., up to six field variables.
Subsequent lines (only needed if the DEPENDENCIES parameterhas a value greater than six):
1. Seventhfield variable.
2. Etc.,up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the thermal expansion coefficient as a
function of temperature and other predefined field variables.
19.4–1
ABAQUS Version 6.1 Module: ID:
Printed on: