3D Connexion Version 6.6 - page 358

*RESPONSE SPECTRUM
4. Z-direction cosine of this direction.
5. Factorm ultiplying the magnitudes in the response spectrum. Defaulti s 1.0.
Second line (optional):
1. Nameof the response spectrum to be used in the second direction.
2. X-direction cosine of this direction. This direction must be at a right angle to the direction
defined above.
3. Y-direction cosine of this direction. This direction must be at a right angle to the direction
defined above.
4. Z-direction cosine of this direction. This direction must be at a right angle to the direction
defined above.
5. Factorm ultiplying the magnitudes in the response spectrum. Defaulti s 1.0.
Third line (optional):
1. Name of the response spectrum to be used in the third direction.
2. X-directioncosine of this direction. Thisdirection must be at right angles to the two directions
defined above.
3. Y-direction cosine of this direction. Thisdirection must be at right angles to the two dir ections
defined above.
4. Z-direction cosine of this direction. This d irection must be at right angles to the two directions
defined above.
5. Factorm ultiplying the magnitudes in the response spectrum. Defaulti s 1.0.
17.14–2
ABAQUS Version 6.1 Module: ID:
Printed on: