*SFILM
The FILM AMPLITUDE parameter is ignored if a nonuniform film coefficient is defined in
user subroutine FILM or if a film coefficient is defined to be a function of temperature andfield
variables using the *FILM PROPERTY option.
OP
Set OP=MOD (default) to modify existing films or to define additional film s.
Set OP=NEW if all existing *SFILMs applied to the model should be removed.
Data lines to define sink temperatures and film coefficients:
First line:
1. Surface name.
2. Film type label F or FNU.
3. Referencesink temperature value, . (Units of .) For nonuniform film coefficients the sink
temperature must be defined in user subroutineFILM. Ifgiven, this value w ill be passed into
the user subroutine.
4. Refe rence film coefficient value, h(units of JT−1L−2 −1), or na me of the film property table
defined with the *FILM PROPERTY option. Nonuniform film coefficients must be defined in
user subroutine FILM. If given, this value will be passed into the user subroutine.
Repeat this data line as often as necessary to define film conditions for differentsurfaces.
18.8–2
ABAQUS Version 6.1 Module: ID:
Printed on: