3D Connexion Version 6.6

*NODAL THICKNESS

Data lines when the GENERATEparameter is omitted:

First line:

1. Node set label or node number.

2. Thickness.

Repeat this data line as often as necessary to deﬁne the variation in shell or membrane thickness.

Data lines when the GENERATEparameter is included:

First line:

1. Nodenum ber or node set label that deﬁnes the ﬁrst bound for the generate operation.

2. Nodenum ber or node set label that deﬁnes the second bound for the generate operation.

3. Numberof intervals between the bounding nodes or node sets.

4. Increment in node numbers from the ﬁrst bounding node or node set.

Repeat this data line as often as necessary to deﬁne the variation in thickness.

14.7–2

ABAQUS Version 6.1 Module: ID:

Printed on: