3D Connexion Version 6.6

*INTERACTION OUTPUT

9.22 *INTERACTION OUTPUT: Specify spot weld interaction variables to be written to the

output database.

This option is used to write spot weld interaction variables to the output databa se. It must be used in

conjunction with the *OUTPUT, HISTORY option.

Products: ABAQUS/Standard ABAQUS/Explicit

Type: History data

Level: Step

References:

•“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User ’sManual

•“Mesh-independent fasteners,” Section28.3.4 of the ABAQUS Analysis User’s Manual

•*OUTPUT

Required, mutually exclusive parameters:

NAME

Set this parameter equal to the name of the spot weld interaction for which this output reques t is

being made.

NSET

Set this parameter equal to the name of the node set for which this output request is being made .

Data lines to request spot weld interaction output to the output database:

First line:

1. Specify the identifying keys for the output variables to be wr itten to the output database.

The keys are deﬁned in “ABAQUS/Standard output variable identiﬁe rs,” Section 4.2.1 of

the ABAQUS Analysis User’s Manual, and “ABAQUS/Explicit output va riable identiﬁers,”

Section 4.2.2 of the ABAQUS Analysis User’sManual.

Repeat this data line as often as necessary to deﬁne the list of variables to be written to the output

database.

9.22–1

ABAQUS Version 6.1 Module: ID:

Printed on: