3D Connexion Version 6.6

*RADIATION PRINT

17.4 *RADIATIONPRINT: Deﬁne print requests for cavity radiation heat transfer.

This option is used to print tabular output of cavity radiation variables (radiation ﬂuxes, v iewfactor totals, and

facet temperatures).

Product: ABAQUS/Standard

Type: History data

Level: Step

References:

•“Cavity radiation,” Section 32.1.1of the ABAQUS Analysis User ’sManual

•“Output,” Section 4.1.1 of the ABAQUS Analysis User ’sManual

Optional, mutually exclusiveparameters (if not speciﬁed, output will be provided for all cavities

in the model):

CAVITY

Set this parameter equal to the name of the cavity for which this output request is being made.

ELSET

Set this parameter equal to the name of the element set f or which this output request is being made.

SURFACE

Set this parameter equal to the name of the surface for which this output request is being m ade.

Optional parameters:

FREQUENCY

Set this parameter equal to the output frequency,in increments. Theoutput will always be printed

at the last increment of each step unless FREQUENCY=0. The default is FREQUENCY=1. Set

FREQUENCY=0 to suppress the output.

SUMMARY

Set SUMMARY=YES(default) to obtain a summary of the maximum andminimum values in each

column of the table and their locations.

SetSUMMARY=NOtosuppressthissummary.

TOTALS

Set TOTALS=YESto print the total of each column in the table. This is useful, for example, to sum

radiation ﬂuxes over all facetscom posinga radiation surface. Thedefault is TOTALS=NO.

17.4–1

ABAQUS Version 6.1 Module: ID:

Printed on: