3D Connexion Version 6.6

*NODE FILE

The default value is LAST MODE=N,whereNis the number of modes extracted. If the

MODE parameter is used, the defaultvalue is LAST MODE=M,whereMis the value of the MODE

parameter.

MODE

This parameter applies only to ABAQUS/Standard analys es.

This parameter is useful only during eigenvalue extraction for natural frequencies and for

eigenvalue buckling estimation. S et this parameter equal to the ﬁrst mode number for which output

is required. The default is MODE=1. See also the LAST MODE parameter. When performing a

*FREQUENCY analysis, the normalization will followthe format set by the NORMALIZATION

parameter. Otherwise, the normalization is such that the largest displacement component in the

mode has a magnitude of 1.0.

NSET

Set this parameter equal to the name of the node set for which the output is bein gw ritten to the

results ﬁle. If this parameter is om itted, the output will be written for all nodes in the model.

Data lines to request nodal output in the results or selected results ﬁle:

First line:

1. Givethe identifying keys for the variables to be written to the results or selected results ﬁle.

The keys are deﬁned in the “Nodal variables”section of “ABAQUS/Standard output variable

identiﬁers,” Section 4.2.1 ofthe ABAQ US AnalysisUser ’sManual, and “ABAQUS/Explicit

output variable identiﬁers,”Section 4.2.2 of the ABAQUS Analysis User’s Manual.

Repeat this data line as often as necessary to deﬁne the nodal variables to be written to the results or

selected results ﬁle.

14.9–2

ABAQUS Version 6.1 Module: ID:

Printed on: