3D Connexion Version 6.6

*IMPORT NSET

9.7 *IMPORT NSET: Import node set deﬁnitions from a previous ABAQUS/Explicit or

ABAQUS/Standard analysis.

This option is used to import node set deﬁnitions that were deﬁned in a previous ABAQU S/Explicit or

ABAQUS/Standard analysis. If the *IMPORT NSET option is used, it must appear after the *IMPORT

option. If this option is omitted or is speciﬁed without any data lines,all the node sets relevant to the analysis

will be imported.

Products: ABAQUS/Standard ABAQUS/Explicit

Type: Model data

Level: Model

References:

•“Transferring results between ABAQUS/Explicit and ABAQUS/Standard,” Section 9.2.2 of the

ABAQUS Analysis User’s Manual

•*IMPORT

There are no parameters associated with this option.

Data lines to specify node set deﬁnitions to be imported:

First line:

1. Listof node se tna mes for which the node set deﬁnitions are to be imported.

Repeat this data line as often as necessary to specify the node set deﬁnitions to be imported. Up to 16

node sets can be listed per line.

9.7–1

ABAQUS Version 6.1 Module: ID:

Printed on: