3D Connexion Version 6.6 - page 180

*M1
Subsequent lines (only needed if the DEPENDENCIES parameterhas a value greater than six):
1. Seventhfield variable.
2. Etc.,up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the bending stiffness as a function of
temperature and other predefined field variables.
Data lines if the LINEAR parameter is omitted:
First line:
1. Bending mom ent.
2. Curvature.
3. Temperature.
4. Firstfield variable.
5. Second field variable.
6. Etc.,uptofivefieldvariables.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greaterthan five):
1. Sixthfield variable.
2. Etc.,up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the bending moment–curvature relationship
as a function of temperature and other predefined field variables.
13.24–2
ABAQUS Version 6.1 Module: ID:
Printed on: