3D Connexion Version 6.6 - page 307

*PRESTRESS HOLD
16.26 *PRESTRESS HOLD: Keep rebar prestress constan t during initial equilibrium
solution.
This option is used within a *STATICstep (“Static stress analysis,” Section 6.2.2 of the ABAQUS Analysis
User’s Manual) to keep the stressin som e or all of therebar constant during the initial equilibrium solution.
Product: ABAQUS/Standard
Type: History data
Level: Step
Reference:
•“Defining reinforcement,” Section 2.2.3 of the ABAQUS Analysis User’sManual
There are no parameters associated with this option.
Data line to hold the prestress constant:
First line:
1. Element set name.
2. Rebar name. The stress in all rebar included in the above element set will be held fixed
throughout the step.
3. Etc.
Repeat this data line as often as necessary. Give four pairs of data per line.
16.26–1
ABAQUS Version 6.1 Module: ID:
Printed on: