3D Connexion Version 6.6

*NODE PRINT

output is required. The default is MODE=1. See also the LAST MODE parameter. When

performing a *FREQUENCY analysis, the normalization w ill follow the format set by the

NORMALIZATIONparameter. Otherwise, the normalization is such that the largest displacement

component in the mode has a magnitude of 1.0.

NSET

Set this parameter equal to the name of the node set for which this outputrequest is being made. If

this parameter is omitted, the output will be printed for all of the nodes in the model.

SUMMARY

Set SUMMARY=YES (default) to obtain a summary and the locations of the maximum and

minimum values in each column of the table. Set SUMMARY=NO to suppress this summary.

TOTALS

Set TOTALS=YESto print the total of each column in the table. This is useful, for example, to sum

reaction forces in a particular direction. The default is TOTALS=NO.

Data lines to request nodal output in the data ﬁle:

First line:

1. Givethe identifying keys for the va riables to be printed in a table for this node set. Thekeys are

deﬁned in the “Nodal variables” portion of “ABAQUS/Standardoutput variable identiﬁers,”

Section 4.2.1 of the ABAQUS Analysis User’sManual.

Repeat this data line as often as necessary: each line deﬁnes a table. If this line is omitted, no nodal

output will be printed to the data ﬁle.

14.11–2

ABAQUS Version 6.1 Module: ID:

Printed on: