3D Connexion Version 6.6

*SUBSTRUCTURE COPY

18.38 *SUBSTRUCTURE COPY: Copy a substructure deﬁnition.

This option is used to copy a substructure deﬁnition from one library to a nother or from one substructure

identiﬁer to another within one library.

Product: ABAQUS/Standard

Type: Model data

Level: This option is not supported in a model deﬁned in terms of an assembly of part i nstances.

Reference:

•“Using substructures,” Section 10.1.1of the ABAQ US Analysis User’sManual

Required parameters:

NEW TYPE

Set this parameter equal to the TYPE identiﬁer of the substructurebeing created.

OLD TYPE

Set this parameter equal to the TYPE identiﬁer of the substructurebeing copied.

Optional parameters:

NEW LIBRARY

Set this parameter equal to the name of the substructure library inwhich the substructure is stored.

The default library name is jobname.

OLD LIBRARY

Set this parameter equal to the name of the substructure library f rom which the substructure is being

copied. The de fault library name is jobname.

There are no data lines associated with this option.

18.38–1

ABAQUS Version 6.1 Module: ID:

Printed on: