3D Connexion Version 6.6

*PREPRINT

16.23 *PREPRINT: Select printout for the analysisinput ﬁle processor.

This option is used to select the printout that will be obtained from the analysis inputﬁle processor.

Products: ABAQUS/Standard ABAQUS/Explicit

Type: Model data

Level: Model

Reference:

•“Output,” Section 4.1.1 of the ABAQUS Analysis User ’sManual

Optional parameters:

CONTACT

This parameter applies only to ABAQUS/Standard analys es.

Set CONTACT=YESto print detailed information about the contact constraints generated by

the contact pair deﬁnition data. Set CONTACT=NO(default) to suppress this printout .

ECHO

SetECH O=YES to print an echo of the input data. SetECHO=NO (default) to suppress this printout.

HISTORY

Set HISTORY=YES to print history data. Set HISTORY=NO (default) to suppre ss this printout.

MODEL

Set MODEL=YES to print model deﬁnition data. Set MODEL=NO (default) to suppress this

printout.

PARSUBSTITUTION

Set PARSUBSTITUTION=YESto print the modiﬁed version of the original input ﬁle that is free

of input model parametrization. Set PARSUBSTITUTION=NO (default)to suppress this printout.

PARVALUES

Set PARVALUES=YES to print a modiﬁed version of the original input ﬁle showing the parameters

used for model parametrization and their values. Set PARVALUES=NO (default) to suppress this

printout.

There are no data lines associated with this option.

16.23–1

ABAQUS Version 6.1 Module: ID:

Printed on: