*SHELL GENERAL SECTION
3. , temperature for these values of Yand .
4. Firstfield variable.
5. Second field variable.
6. Etc.,uptofivefieldvariables.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greaterthan five):
1. Sixthfield variable.
2. Etc.,up to eight field variables per line.
Repeat this set of data lines as often as necessary to define Yand as functions of temperature and
other predefined field variables.
Data lines if the USER parameter is included:
First line:
1. Shellthickne ss. This value is ignored if the NODAL THICKNESS parame ter is included.
Second line:
1. Enterthe data to be used as pr operties in user subroutine UGENS. Enter all floating point values
first, followed immediately by the integer values.
Repeat this dataline as often as necessar y todefi ne theproper ties required in UGENS.Enter eight values
per line for both real and integer values.
18.14–5
ABAQUS Version 6.1 Module: ID:
Printed on: