3D Connexion Version 6.6 manual

*PLANAR TEST DATA
3. Nominal transverse strain, . Default is zero. Not needed if the POISSON parameter is
specifiedonthe*HYPERFOAMoption.
Repeat this data line as often as necessary to give the stress-strain data.
Using planar test data to define the Mullins effect material model
References:
•“Mullins effect in rubberlikematerials,” Section 17.6.1 of the ABAQUS Analysis User’s Manual
•“Energy dissipationin elastomeric foams,” Section 17.6.2 of the ABAQUS Analysis User’s Manual
•*MULLINS EFFECT
There are no parameters associated with this option.
Data lines to specify planar test data for defining the unloading-reloadingresponse of the
Mullins effect material model:
First line:
1. Nominal stress, .
2. Nominal strain in the direction of loading, .
Repeat this data line as often as necessary to give the stress-strain data.
16.11–3
ABAQUS Version 6.1 Module: ID:
Printed on: