3D Connexion Version 6.6

*MODAL PRINT

13.14 *MODALPRINT: Print generalized coordinate (modal amplitude) data during a mode-

based dynamic procedure.

This option is used during mode-based dynamic procedures to control the printed output of generalized

coordinate (modal amplitude and phase) values.

Product: ABAQUS/Standard

Type: History data

Level: Step

Reference:

•“Output to the data and results ﬁles,” Section4.1.2 of the ABAQUS Analysis User ’sManual

Optional parameter:

FREQUENCY

Set this parameter equal to the output frequency,in increments. Theoutput will always be printed

at the last increment of each step unless FREQUENCY=0. The default is FREQUENCY=1. Set

FREQUENCY=0 to suppress the output.

Data lines to request modal output in the data ﬁle:

First line:

1. Give the identifying keys for the variables to be printed. The keys are d eﬁned in the “Modal

variables” section of “ABAQUS/Standard output variable identiﬁers,” Section 4.2.1 of the

ABAQUS Analysis User’s Manual.

Repeat this data line as often as necessary: each line deﬁnes a table.

13.14–1

ABAQUS Version 6.1 Module: ID:

Printed on: