3D Connexion Version 6.6

*INTERACTION PRINT

9.23 *INTERACTION PRINT: Deﬁne printrequests for spot weld interaction variables.

This option is used to provide tabular printed output of spot weld interaction variables .

Product: ABAQUS/Standard

Type: History data

Level: Step

References:

•“Output to the data and results ﬁles,” Section4.1.2 of the ABAQUS Analysis User ’sManual

•“Mesh-independent fasteners,” Section28.3.4 of the ABAQUS Analysis User’s Manual

Optional, mutually exclusiveparameters:

NAME

Set this parameter equal to the name of the spot weld interaction for which this output reques t is

being made.

NSET

Set this parameter equal to the name of the node set for which this output request is being made .

Optional parameters:

FREQUENCY

Set this parameter equal to the output frequency,in increments. The default is FREQUENCY=1.

Set FREQUENCY=0 to suppressthe output. Theoutput will always be printed at the last increment

of each step unless FREQUENCY=0.

SUMMARY

Set SUMMARY=YES(default) to obtain a summary of the maximum andminimum values in each

column of the table and their locations. SetSUMMARY=NO to suppress this summary.

TOTALS

Set TOTALS=YESto print the total of each column in the table. Thedefault is TOTALS=NO.

9.23–1

ABAQUS Version 6.1 Module: ID:

Printed on: