*MODEL CHANGE
Data lines to remove/reactivate elements (TYPE=ELEMENT):
First line:
1. Give a list of element numbers and/or element set names that are involved in therem oval or
reactivation.
Repeat this data line as often as necessary.
Data lines to remove/reactivate contactpairs (TYPE=CONTACT PAIR):
First line:
1. Slavesurface name used in the contact pair being removed or reactivated.
2. Mastersurface name used in the contact pair being removed or reactivated. For self-contact
the master surface name is omitted or is the same a s the slave surface name.
Repeat this data line as often as necessary.
No data lines are used with this option when the ACTIVATE parameter is included.
13.15–2
ABAQUS Version 6.1 Module: ID:
Printed on: