3D Connexion Version 6.6

*USER OUTPUT VARIABLES

20.7 *USER OUTPUT VARIABLES: Specify number of user variables.

This option is used to allow ABAQUS to allocate space at each material calculation pointfor user-deﬁned

output variables deﬁned in user subroutine UVARM.Ifthe*USER OUTPUT VARIABLESoption is used, it

must appear within each of the relevant material or gasket behaviordeﬁnitions.

Product: ABAQUS/Standard

Type: Model data

Level: Model

Reference:

•“UVARM,”Section 1.1.44 of the ABAQUS User Subroutines Reference Manual

There are no parameters associated with this option.

Data line to specify the number of user variables:

First (and only) line:

1. Numberof user-deﬁned variables required at each material point.

20.7–1

ABAQUS Version 6.1 Module: ID:

Printed on: