*INITIAL CONDITIONS
Subsequent lines (onlyneeded if more than seven solution-dependent state variables exist in the model):
1. Valueof eighth solution-dependent state variable.
2. Etc.,up to eight solution-dependent state variables per line.
It may be necessary to leave blank data lines for some elements if any other element in the model
has more solution-dependent state variables because thetotal number of variables that ABAQUS
expects to read for any element is based on the maximum number of solution-dependent state
variables for all the elements in them odel. These trailing initial values will be zero and will notbe
used in the analysis. Valuesgiven on the data lines will be applied uniformly over the element.
Repeat this set of data lines as often as necessary to define initial values of solution-dependent state
variables for various elements or elementsets.
Data lines for TYPE=SOLUTION,REBAR:
First line:
1. Elementnum beror elem ent set label.
2. Rebarna me. If this field is left blank, the solution-dependent state va riables are applied to all
rebars in these elements.
3. Valueof first solution-dependent state variable.
4. Value of second solution-dependentstate variable.
5. Etc.,up to six solution-dependent state variables.
Subsequent lines (only needed if more than six solution-dependent state variables existin the model):
1. Value of seventh solution-dependent statevariable.
2. Etc.,up to eight solution-dependent state variables per line.
It may be necessary to leave blank data lines for some elements if any other element in the model
has more solution-dependent state variables because thetotal number of variables that ABAQUS
expects to read for any element is based on the maximum number of solution-dependent state
variables for all the elements in them odel. These trailing initial values will be zero and will notbe
used in the analysis. Valuesgiven on the data lines will be applied uniformly over the element.
Repeat this set of data lines as often as necessary to define initial values of solution-dependent state
variables for various elements or elementsets.
No data lines are required for TYPE=SOLUTION, USER.
Data lines for TYPE=SPECIFIC ENERGY:
First line:
1. Elementnum beror elem ent set label.
9.18–13
ABAQUS Version 6.1 Module: ID:
Printed on: