3D Connexion Version 6.6 - page 90

*INTERACTION PRINT
Data lines to request spot weld interaction variableoutput to the data file:
First line:
1. Givethe identifying keys for the variables to be written to the data file. The keys are defined
in “ABAQUS/Standard output variable identifiers,” Section 4.2.1 of the ABAQUS Analysis
User’s Manual.
Repeat this data line as often as necessary: each line defines a table. Ifthis line is omitted, the default
variables will be output.
9.23–2
ABAQUS Version 6.1 Module: ID:
Printed on: