10 Contents
ITG Card Properties Configuration window 349
DSP maintenance window 349
D-channel maintenance 350
Transmitconfiguration data 350
Addan IP Trunk3.01 (and later) node on TM 3.1 by retrieving an existing node 353
Retrieve and add an IP Trunk3.01 (and later) node for administration
purposes 353
Retrieveand add an IP Trunk 3.01 (and later) node for maintenance and diagnostic
purposes 355
Configuration audit 356
Retrieve IP Trunk3.01 (and later) configuration information from the IP Trunk
3.0 (and later) node 357
Schedule and generate and viewIP Trunk 3.01 (and later) OM reports 358
System commands LD 32 362
Disable the indicated IP trunk card 363
Disable the indicated IP trunk card when idle 363
Enable an indicated IP trunk card 364
Disable an indicated IP trunk card port 364
Enable an indicated IP trunk card port 364
Display IP trunk card ID information 364
Display IP trunk card status 364
Display IP trunk card port status 364
OA and M using the ITG shell CLI and overlays 367Contents 367
Introduction 368
ITG Shell OA and M procedure summary 368
Access the ITG shell through a maintenance port or Telnet 368
Connect a PC to the card maintenance port 369
Telnetto an IP trunk card through the TM 3.1 PC 370
Change the defaultITG shell password to maintain access security 371
Reset the default ITG shell password 372
Download the ITG operational measurements throughthe ITG shell 374
Reset the operational measurements 375
Display the number of DSPs 375
Display IP Trunk3.01 (and later) node Properties 375
Display IP Trunk3.01 (and later) Gatekeeper status 376
Transferfiles through the Command Line Interface 377
Upgrade IP trunk card software using FTP 379
Backup and restore from the CLI 382
Recover the SNMP community names 383
IP Trunk3.01 (and later) configuration commands 384
Download the IP Trunk3.01 (and later) error log 384
System commands LD 32 384
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21December 2007
Copyright© 2007, Nor tel Networks
.