473
Appendix GUpgrade an ITG Trunk 1.0 node tosupport ISDN signaling trunks
Contents This section contains information on the following topics:
"Upgrade procedure summary" (page 474)
"Before you begin" (page 474)
"Install the DCHIP hardware upgrade kit" (page 476)
"Install the DCHIP I/O Panel breakout cable from the upgrade kit" (page 477)
"Upgrade the ITG 8-port trunk card ITG basic trunk software to ITG/ISL trunk
software" (page 478)
"Step 1 - Remove ITG Trunk 1.0 configuration files" (page 478)
"Step 2 - Transmit ITG Trunk 2.0 software to the ITG 8-port trunk cards" (page
480)
"Remove ITG Trunk 1.0 configuration data from Meridian 1" (page 482)
"Configure the Meridian 1 ITG/ISL trunk data" (page 483)
"Upgrade considerations" (page 483)
"Verify ROM-BIOS version" (page 485)
"Upgrade Troubleshooting" (page 485)
"TM 3.1 cannot refresh view (card not responding)" (page 485)
"How to upgrade software using the ITG shell" (page 485)
This Appendix is included as a reference for ITG Trunk1.0 customers who
wish to upgrade their systems to ITG Trunk2.0 to include ISDN Signaling
Link (ISL) capabilities. An upgraded ITG Trunk 2.0 node can support ITG
8-port and ITG-Pentium 24-port trunk cards in the same node. All ITG
8-port trunk cards in a node must be upgraded to ITG/ISL software. ITG
Trunk2.0 also supports inter-working betweenITG Trunk 2.0 nodes and ITG
Trunk1.0 (Basic Trunk) nodes in the same network.
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.