274 Install and configure IP Trunk3.01 (and later) node
For ITG-Pentium 24-port trunk cards, download the Software
Package for Release IP Trunk3.01 (and later).
8When prompted, select Download. Record the file name and
location of downloaded software on the TM 3.1 PC.
—End—
Now the new IP trunk card software is ready to be transmitted from TM 3.1
to the IP trunk cards.
Transmit new software to the IP trunk cards
Verify that the IP trunk cardsare disabled before transmitting new card
software.
Disable the IP trunk cards when transmitting card properties or new
software.
Use the TM 3.1 Maintenance Windows, the TM 3.1 System Passthru
terminal, or a system management terminal directly connected to a TTY
port on the system.
Use the LD 32 DISI command to disable the IP trunk cards when idle.
NPROG indicates that all units on the card have been disabled.
In the TM 3.1 IP TelephonyGateway - ISDN IP Trunk window, select View
> Refresh and verify that the card status is showing "Disabled". If the card
status shows "unequipped", configure the card in LD 14.
Follow the steps in Procedure 36 "Transmittingnew software to the IP trunk
cards" (page 274) to transmit the new software to the IP trunk cards.
Procedure 36
Transmittingnew software to the IP trunk cards
Step Action
1Open TM 3.1. Click Services and launch the ITG ISDN IP Trunks
application.
2Select the node to upgrade from the list in the upper half of the IP
TelephonyGateway - ISDN IP Trunk window.
3Select node or cards for software transmission according to card
density:
If all cards in the node have same card density (24-port or
32-port), upgrade all the cards together by transmitting to the
selected node. Click the new node in the upper half of the IP
TelephonyGateway - ISDN IP Trunk window.
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.