IP Trunk3.01 (and later) IP trunk card alar ms 391
•"Fault clearance procedures" (page 421) – potential system faultsand
how to correct them.
IP Trunk 3.01 (and later) IP trunk card alarms
This section describes the alarms, messages and codes output by the
ITG-Pentium 24-port and Media Card 32-port trunk cards. All IP Trunk 3.01
(and later) IP trunk card alarms shown in Table55 "IP Trunk 3.01 (and later)
alarms" (page 392) on Table55 "IP Trunk 3.01 (and later) alarms" (page
392) can be emitted as SNMP traps. SNMP is the method IP Trunk 3.01
(and later) uses to send alarms to an alarm monitoring center.
IP Trunk3.01 (and later) displays and logs alarm information in the following
ways:
•Displayed onthe IP tr unk cardconsole through the ITG shell in a Telnet
session or on a terminal connected to the local maintenance port.
•Logged in the error log files on the /C: drive of the IP trunk card.
•Events of the type "ITG4xx" (that is, major alarms – immediate
intervention required) are displayed on the faceplate maintenance
display. They appear in the form "I:4xx", where "4xx" corresponds to
last three digits of the alarm ITG04xx listed in Table55 "IP Trunk 3.01
(and later) alarms" (page 392) on Table55 "IP Trunk 3.01 (and later)
alarms" (page 392).
•Access the current error log file through TM 3.1 IP Trunk3.01 (and later)
IP trunk card properties by clicking the Open Log File button on the
Maintenance tab of IP trunk card properties.
If enabled in the TM 3.1 ITG Node Properties SNMP Trap/Routing table
IPs tab, SNMP sends appropriate traps to TM 3.1 Alarm Management or
another specific SNMP manager when an error or event occurs. The IP
trunk card also puts the system error message in the error log file on the
/C: drive of the IP trunk card. View the log file with any text browser after
uploading it to an FTP host. To upload the log file to an FTP host, enter:
"currLogFilePut"or"prevLogFilePut" from the ITG shell.The IP trunk
card generates SNMP alarm traps for the followingfour alarm categories:
•Alarm Clearance (ITG01xx) – for information purposes
•Minor Alarm (ITG02xx) – no intervention required
•Major Alarm (ITG03xx) – intervention required, but not immediately
•Major Alarm (ITG04xx) – immediate action required. Card is out of
service
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21December 2007
Copyright© 2007, Nor tel Networks
.