Nortel Networks NN43001-563 Retrieve and add an IP Trunk 3.01 (and later) node formaintenance and diagnostic purposes

Retrieveand add an IP Trunk 3.01 (and later) node for maintenance and diagnostic purposes 355
The Retrieve control dialog boxdisplays the results of the retrieval.
The node properties, card properties and dialing plan are retrieved
from the Leader card.
8Click Close when the download is complete.
9Refresh the card status and check that the cards in the new node
are responding.Todetermine the IP trunk card status, in the IP
TelephonyGateway – ISDN IP Trunk window click View > Refresh
> All.
Look at the IP trunk card in the bottom window and see what is
under the title "Card State". See Figure 143 "Deter mine IP trunk
card status" (page 355).
Figure 143
Determine IP trunk card status
—End—
Retrieve and add an IP Trunk 3.01 (and later) node formaintenance
and diagnostic purposes
Follow the steps in Procedure 57 "Creating a dummy IP Trunk3.01
(and later) node" (page 356) to create a "dummy" IP Trunk 3.01 (and
later) node for retrieving and viewing the real IP Trunk3.01 (and later)
node configuration, without overwriting the existing IP Trunk3.01 (and
later) configuration data for an existing node in the TM 3.1 IP Trunk3.01
(and later) database. Retrieving the real IP Trunk 3.01 (and later) node
configuration to the "dummy" node is useful in the followingcases:
•isolating IP Trunk3.01 (and later) node configuration faults
•determining which copy of the database is correct, so that the required
direction of database synchronization can be determined:
— transmit the TM 3.1 IP Trunk 3.01 (and later) database to the IP
Trunk3.01 (and later) node
— retrieve the database from the IP Trunk 3.01 (and later) node for the
TM 3.1 IP Trunk3.01 (and later) node
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21December 2007
Copyright© 2007, Nor tel Networks
.