Access the ITG shell through a maintenance port or Telnet 379
Configuration file transfer
Use these commands to backup and restore files when the preferred
method, the TM 3.1 PC, is not available.
DPAddrTGet "hostname","username","password", "directory
path","filename"
DPAddrTPut "hostname","username","password", "directory
path","filename"
configFileGet "hostname","username","password", "directory
path","filename"
configFilePut "hostname","username","password", "directory
path","filename"
bootPFileGet "hostname","username","password", "directory
path","filename"
bootPFilePut "hostname","username","password", "directory
path","filename"
OM trace and log files commands
Use these commands to put files on a host for additional analysis when
TM 3.1 cannot.
currOmFilePut "hostname","username","password", "directory
path","filename"
prevOmFilePut "hostname","username","password", "directory
path","filename"
traceFilePut "hostname","username","password", "directory
path","filename"
currLogFilePut "hostname","username","password", "directory
path","filename"
prevLogFilePut "hostname","username","password", "directory
path","filename"
Upgrade IP trunk card software using FTP
Use Procedure 66 "Upgrading IP trunk card software through an FTP
host" (page 381) to upgrade the IP trunk card software when the preferred
method, described in "Transmitnew software to the IP trunk cards" (page
274), is not available.
If the TM 3.1 PC is remotely connected to the IP Trunk3.01 (and later) node
with a a PPP link through the dialup modem router, then use this procedure
to upgrade the IP trunk card from an FTP host. This ensures that the
software file is transmitted intact beforeit is copied to the flash ROM device.
This procedure updates the IP trunk card software with the binary file
received from an FTP host or IP trunk card with IP address hostname. The
IP trunk card FTP client performs a get which downloads the file to the
IP Trunk3.01 (and later) flash device. A checksum is calculated to check
correct delivery. When the new software version is correctly downloaded,
reboot the IP trunk card with cardReset to run the new software.
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.