367
OA and M using the ITG shell CLI andoverlays
Contents This section contains information on the following topics:
"Introduction" (page 368)
"ITG Shell OA and M procedure summary" (page 368)
"Access the ITG shell through a maintenance port or Telnet" (page 368)
"Connect a PC to the card maintenance port" (page 369)
"Telnet to an IP trunk card through the TM 3.1 PC" (page 370)
"Change the default ITG shell password to maintain access security" (page
371)
"Reset the default ITG shell password" (page 372)
"Download the ITG operational measurements through the ITG shell" (page
374)
"Reset the operational measurements" (page 375)
"Display the number of DSPs" (page 375)
"Display IP Trunk 3.01 (and later) node Properties" (page 375)
"Display IP Trunk 3.01 (and later) Gatekeeper status" (page 376)
"Transfer files through the Command Line Interface" (page 377)
"Upgrade IP trunk card software using FTP" (page 379)
"Backup and restore from the CLI" (page 382)
"Recover the SNMP community names" (page 383)
"IP Trunk 3.01 (and later) configuration commands" (page 384)
"Download the IP Trunk 3.01 (and later) error log" (page 384)
"System commands LD 32" (page 384)
"Disable the indicated IP trunk card" (page 363)
"Disable the indicated IP trunk card when idle" (page 363)
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.