461
Appendix FConfigure a Netgear RM356 modemrouter for remote access
Contents This section contains information on the following topics:
"Introduction" (page 461)
"Security features of the RM356 modem router" (page 462)
"Install the RM356 modem router" (page 462)
"Configure the TM 3.1 PC to communicate with a remote system site through
a modem router" (page 463)
"Configure the RM356 modem routerthrough the manager menu" (page 463)
"RM356 modem router manager menu (application notes on the ELAN subnet
installation)" (page 467)
IntroductionManagement and suppor t of the IP Trunk3.01 (and later) network depends
on IP networking protocols including SNMP,FTP, and Telnet. A modem
router should be installed on the system site ELAN subnet to provide remote
support access for ITG and other IP-enabled Nortel products. The Nor tel
Netgear RM356 modem router integrates the functions of a V.90modem, a
PPP remote access server, an IP router,and a 4-port 10BaseT Ether net
hub, and provides a range of security features that can be configured to
comply with the customer’s data network security policy.
Do not install a modem router on the ELAN subnet without the explicit
approval of the customer’s IP network manager. The RM356 modem router
is not secure unless it is configured correctly,according to the customer’s
network security policy and practices.
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.