Nortel Networks NN43001-563 Exit node property conguration session

252 Install and configure IP Trunk3.01 (and later) node
The community name strings are configured on the Security tab. These are
not picked up from the System Properties – General tab.
Figure 58
ITG Node Properties Security Tab
Change the current System Mgmt Read and System Mgmt Read/Write
community name strings as per the Card. TM 3.1 uses the previous
read/write community name to transmit the card properties. The first time
data is transmitted after changing the password, TM 3.1 uses the previous
read/write password. TM 3.1 uses the changed password for all following
data transmissions.
For more information on SNMP,refer to Communication Server 1000 Fault
Management - SNMP (NN43001-719).
Exit node property configuration session
The procedure to add an IP Trunk3.01 (and later) node manually in TM 3.1
is complete. Click OK to save the node and card properties configuration
and exit. TM 3.1 displays the IP Telephony Gateway - ISDN IP Trunk
window. If a network of IP Trunk 3.01 (and later) nodes is to be managed
from this TM 3.1 PC, add the remaining IP Trunk 3.01 (and later) nodes
before configuring the dialing plan for the new IP Trunk3.01 (and later)
nodes on TM 3.1.
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.