Nortel Networks NN43001-563 Add a system

Add a site and system 289
—End—
Add a system
Though the site has been added, no switches or nodes havebeen defined.
A PBX, also called a system, must be added. For IP Trunk 3.01 (and later),
the system usually corresponds to a single PBX.
Procedure 42
Adding a system
Step Action
1There are two ways to add a newsystem in the TM 3.1 Navigator
window, as follows:
•Right-click the new site. A menu appears, as shown in Figure 76
"New system, add a system by right-clicking" (page 289). Click
Add System. The Add System window opens. See Figure 78
"Select a system type" (page 291).
Figure 76
New system, add a system by right-clicking
•Alternatively, select the newsite. From the menu bar, click
Configuration > Add System. See Figure 77 "New system
menu bar" (page 290). The Add System window opens. See
Figure 78 "Select a system type" (page 291).
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21December 2007
Copyright© 2007, Nor tel Networks
.