Nortel Networks NN43001-563 Add an IP Trunk 3.01 (and later) node and congure general node properties

Configure IP Trunk3.01 (and later) data in TM 3.1 237
Add an IP Trunk 3.01 (and later) node and configure general node
properties
Follow the steps in Procedure 17 "Adding a node and configuring general
node properties" (page 237) to add an IP Trunk 3.01 (and later) node and
configure general node properties.
Procedure 17
Adding a node and configuring general node properties
Step Action
1Launch TM 3.1 (and later) on the TM 3.1 PC.
2From the TM 3.1 Navigator window,double-click the Services folder
and double-click the ITG ISDN IP Trunksicon. The IP Telephony
Gateway- ISDN IP Trunkwindow opens.
3Select Configuration > Node > Add in the IP Telephony Gateway
– ISDN IP Trunkwindow. The AddITG Node window opens. See
Figure 50 "Add ITG Node window" (page 237).
Figure 50
Add ITG Node window
4In the Add ITG Node window,keep the default selections Meridian
1and Define the node configuration manually. Click OK. The
New ITG Node – General window appears. See Figure 51 "General
tab" (page 238).
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.