250 Install and configure IP Trunk3.01 (and later) node
The IP trunk card uses the addresses in the routing table entries to
route signaling packets over the ELAN network interface gateway
(router) on the ELAN subnet. Without routing table entries, the IP
trunk card routes signaling traffic over the TLAN network interface
gateway. Sending signaling traffic overthe TLAN subnet can affect
voice quality.
7Click Apply.
8Click OK to exit the window.
9Totransmit the information to the node, from the menu select
Configuration > Synchronize > Transmit.
—End—
Configure Accounting server
If a Radius Accounting Server is not used, skip this step. A Radius
Accounting Server collects call records from the IP trunk cards and
generates billing reports. Follow the steps in Procedure 23 "Configuring a
Radius Accounting Server" (page 250) to configure a Radius Accounting
Server.
Procedure 23
Configuring a Radius Accounting Server
Step Action
1Click the Accounting Server tab. See Figure 57 "Accounting Server
tab" (page 251).
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.