ITG-Pentium24-por t trunk card faceplate maintenance display codes 427
Normal
Code Fault
Code Description
T:20 CardLAN enabled, waitingfor Request Config Message.
IP trunk card is looking for an active leader by sending
BOOTP requests on the ELAN subnet. If no BOOTP
response is received on the ELAN subnet, Leader 0
times out first and starts active leader tasks. Leader 1
has a longer time out and normally starts backup leader
tasks when it detects an active leader, otherwise Leader
1 times out and starts active leader tasks.
A Follower card sends BOOTP requests on the ELAN
subnet continuously and never times out. From the
keyboardof a terminal attached to the local maintenance
port, enter +++ to escape from BOOTP request mode
and start ITG shell for manual configuration.
BIOS Card is running the ROM BIOS.
The card detected no valid IP Trunk 3.01 (and later)
software image or the JKL escape sequence was
entered during startup from the keyboard of a terminal
connected to the local maintenance port.
If the IP trunk card faceplate displays BIOS, it is not
functioning as an IP trunk card.
T:21 Card LAN operational, A07 interface to system enabled,
display now under IP Trunk 3.01 (and later) software
control.
ITG > shell is available for manual card configuration.
T:22 ITG-Pentium 24-port trunk card is starting up the IP
Trunk 3.01 (and later) application.
LDR Card is running active leader tasks.
BLDR Card has detected existing Active Leader and is running
Backup Leader tasks, or the card is configured as a
leader and is missing its node properties. Transmit node
properties from TM 3.1.
FLR Card has detected the Active Leader and is running
Follower tasks.
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21December 2007
Copyright© 2007, Nor tel Networks
.