Control node access with SNMP community name strings 251
Figure 57
Accounting Server tab
2Click the Enable Radius accounting records checkbox.
3Enter the Radius accounting server IP address. Add the
same Accounting Server IP address that was configured in the
Card Routing Tableentries as discussed in "ConfigureSNMP
Traps/Routingand IP addresses tab" (page 247).
4Change the default port number from the default(1813), if required.
5Enter the key. The keyis a signature for authentication of the Radius
records. It can be a maximum of 64 alpha-numeric characters.
6Click Apply.
—End—
Control node access with SNMP community name strings
Change the SNMP community name strings to control access to the IP
Trunk3.01 (and later) node. TM 3.1 uses the community name strings to
refresh the IP Trunk3.01 (and later) node and card status and to control the
transmitting and retrieving of files for database synchronization.
Toretrieve the community names if forgotten, connect a TTY to the IP trunk
card maintenance port. Restart the IP trunk card. TheIP trunk card displays
the community name on the TTY during startup.
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.