Nortel Networks NN43001-563 Obtain QoS measurement tools, Measure end-to-end network delay

Measure intranet QoS 143
Figure 30
QoS level with G.723 codec
Obtain QoS measurement tools
PING and Tracerouteare standard IP tools that are usually included with
a network host’s TCP/IP stack. A survey of QoS measurement tools and
packages, including commercial ones, can be found in the home page
of the Cooperative Association for Internet Data Analysis (CAIDA) at
www.caida.org These include delaymonitoring tools that include features
like timestamping, plotting, and computation of standard deviation.
Measure end-to-end network delay
The basic tool used in IP networks to measure end-to-end network delay is
the PING program. PING takes a delaysample by sending an ICMP packet
from the host of the PING program to a destination server. PING then waits
for the packetto make a round trip. A sample of PING is as follows:
Richardson3% PING -s santa_clara_itg4 60
PING santa_clara4 (10.3.2.7): 60 data bytes
68 bytes from (10.3.2.7): icmp_seq=0 ttl=225
time=97ms
68 bytes from (10.3.2.7): icmp_seq=0 ttl=225
time=100ms
68 bytes from (10.3.2.7): icmp_seq=0 ttl=225
time=102ms
68 bytes from (10.3.2.7): icmp_seq=0 ttl=225
time=97ms
68 bytes from (10.3.2.7): icmp_seq=0 ttl=225
time=95ms
68 bytes from (10.3.2.7): icmp_seq=0 ttl=225
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21December 2007
Copyright�� 2007, Nor tel Networks
.