Nortel Networks NN43001-563 - page 331

Define the dialing plan information 331
10 Enter the node IP address, select the node capability from the
drop-down list, enter a name for the node (optional), set the QoS
monitoring option, and enter comments if desired.
WARNING
If a remote node has IP PeerH.323 Gateway capability, do
notuse QoS monitor ing unless that node is also running IP
Trunk3.01 (and later). No other IP PeerH.323 Gateways
support IP Trunk3.01 (and later)-formatted QoS.
Unless both sides support IP Trunk3.01 (and later) and
haveit enabled, calls cannot bemade tothat node.
11 Click Apply. See Figure 126 "Remote Node Properties General
tab" (page 331).
Figure 126
Remote Node Properties General tab
12 Click the Digits dialed tab. The Add button is inactive until values
are entered in the Dial plan digits field.
On the Digits dialed tab,enter the dialplan information for this node.
13 Fromthe Dial Plandrop-down list, select the correct dial plan/typeof
number selection. See Figure 127 "Select the Dial Plan" (page 332).
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21December 2007
Copyright© 2007, Nor tel Networks
.