System commands LD 32 363
Table 5 2
LD 32 IP Trunk3.01 (and later) maintenance commands
Command Description
DISC l s c Disable the indicated card, where: l =
loop, s = shelf, c = card
DISI l s c Disable the indicated card when idle,
where: l = loop, s = shelf, c = card
Use the DISI command to disable
the IP trunk card instead of the DISC
command. The disablement of the IP
trunk card is indicated by the NPR011
message.
DISU l s c u Disable the indicated unit,
where: l = loop, s = shelf,
c = card, u = unit
ENLC l s c where: l = loop, s = shelf,
c = card
ENLU l s c u Enable the described unit,
where: l = loop, s = shelf,
c = card, u = unit
IDC l s c Print the Card ID information for the
described card,
where: l = loop, s = shelf,
c = card
STAT l s c Print the system software status of the
indicated card.
where: l = loop, s = shelf, c = card
STAT l s c u Print the system software status of the
indicated unit,
where: l = loop, s = shelf, c = card, u
= unit
Disable the indicated IP trunk card

Todisable the indicated IP trunk card in LD 32, use the following command:

DISC l s c Disable the indicated IP trunk card,
where: l = loop, s = shelf,
c = card
Disable the indicated IP trunk card when idle

Todisable the indicated IP trunk card when idle in LD 32, use the following

command:
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21December 2007
Copyright© 2007, Nor tel Networks
.