244 Install and configure IP Trunk3.01 (and later) node
Configure DSP profiles for the IP Trunk 3.01 (and later) node
Follow the steps in Procedure 20 "Configuring DSP profiles for the IP Trunk
3.01 (and later) node" (page 244) to select a DSP profile, set Profile Options
and Codec Options and, if required, modify default DiffServ/TOS values
from 0. Set these profiles once for the IP Trunk 3.01 (and later) node. In a
later step, download the DSP profiles card properties to each card.
Procedure 20
Configuring DSP profiles for the IP Trunk3.01 (and later) node
Step Action
1Click the DSP Profile tab. See Figure 53 "DSP Profile General tab"
(page 244). The General tab displays a detailed description of the
default DSP Profile 1.
2Change the default DSP profile from the drop-down list, if required.
There are three DSP profiles. Each profile contains two or more
codecs. All IP trunk cards in the same node share the same DSP
profile.
CAUTION
The default DSP profile is Profile 1, which is appropriate
for most applications. Only an expert in VoIP should
modify the default DSP profile. "IP Trunk 3.01 (and later)
DSP profile settings" (page 161)
Figure 53
DSP Profile General tab
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.