Control node access with SNMP community name strings 259
4Click the Configuration tab. Record the Management IP address of
Leader 0 on the new node.
5On the Configuration tab, change the Management IP address of
Leader 0 on the new node. Enter the Management IP address of the
Leader 0 card on the existing node recorded in Step 2.
6Click Change and then click OK.
7Select the new node in the upper part of the IP Telephony Gateway
- ISDN IP Trunk window.
8Select menu Configuration > Synchronize > Retrieve to open the
ITG Retrieve Options window.
9Check only the Dialing Plan check box if the community name for
both the existing and new nodes is the same.
Check the Dialing Plan check box and the Prompt user for
community name check box if the community name for both the
existing and new nodes are different. A dialog box appears. Enter
the new node’s community name.
10 Click Start Retrieve and monitor progress in the Retrieve control
field. Ensure the dialing plan is retrieved successfully and added
to the TM 3.1 database.
11 Click Close to close the ITG Retrieve Options window and return to
the IP TelephonyGateway - ISDN IP Trunk window.
12 Select the new node and double-click to open its Node Properties
sheet.
13 On the Configuration tab, change the Management IP address
of Leader 0 on the new node. Enter the correct Management IP
address of the Leader 0 card on the new node.
14 Click Change and then click OK.
15 Select menu Configuration > Node > Dialing Plan to open the
ITG Dialing Plan window.
16 Inspect the retrieved dialing plan forthe new node and make any
necessary modifications. Double-click a dialing plan entry to inspect
its property sheet. To save modifications, click Apply and then OK.
From the Viewmenu, the option is availableto view by Digits dialed
or Remote Nodes.
—End—
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21December 2007
Copyright© 2007, Nor tel Networks
.