Add an IP Trunk3.01 (and later) node 303
Figure 94
New ITG node General tab
7On the General tab, on the left side of the window, definethe
following from the drop-down lists:
The TM 3.1 site – the name that was assigned when the site was
created. See "Add a site and system" (page 282).
The TM 3.1 system name – the name of thesystem associated
with this site. See "Add a system" (page 289).
The Customer number.
The Node number – there might be several nodes; this
differentiates between them.
8On the right side of the window, enter the following information:
VoiceLAN Node IP – the Leader IP address for call processing
Management LAN gateway IP – the lowestvalid IP address on
the LAN segment of the Management Server
Management LAN subnet mask – the ELAN subnet mask
VoiceLAN subnet mask – the TLAN subnet mask
Provision the IP trunk cards
9Click the Configuration tab. This is where the IP trunk cards are
provisioned. See Figure 95 "New ITG Node - Configuration tab"
(page 304).
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.