Add a site and system 291
Figure 78
Select a system type
The New System Properties window opens. This window enables
system-wide values to be provisioned.
3Click the General tab. An empty New System Properties window
opens. See Figure 79 "Empty New System Properties window"
(page 291).
Figure 79
Empty New System Properties window
The General properties must be provisioned before any other site
properties, as the information on the General tab pertains to the
entire system and all IP Trunknodes on the system.
4Give the system its own uniquename. If the system is co-located
with the site, as in this example, select the Same as Site check box.
The rest of the information is obtained from the site information and
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.