376 OA and M using the ITG shell CLI and overlays
Card Mode: Normal
Codecs: G.711 mu-law (default), G.711 a-law, G.729AB,
G.729A
EC Tail Length: Value from TM 3.1-32
DCHIP IP: 47.11.217.21
DCH Num: 10
DCH ON Card: YES (version 3.1)
DCH Status: ENBL
Protocol: SL1 ESN5
initBchNum: 1
esn5Prefix: |100|
TLAN set to Auto-negotiate Speed and Duplex Settings
TLAN currrently operate at: 100 Mbps (Carrier OK)
ELAN set to 10BaseT Operation
ELAN set to Half Duplex Operation
value = 38 = 0x26 = ’&’
The following commands give additional information about an IP trunk card:
ldrResTableShow
ifShow
dongleIDShow
serialNumShow
firmwareVersionShow
swVersionShow
emodelSim
Display IP Trunk 3.01 (and later) Gatekeeper status
At the ITG shell prompt, type the following command to displayinformation
about the IP Trunk3.01 (and later) registration with a Gatekeeper :
gkShow
The following information appears on the TTY:
provisioned information (for example,the H.323 node name, which card
to register, and the Gatekeeper IP address)
operational information, such as whether the IP trunk card is registered
with the Gatekeeper and with which Gatekeeper the IP trunk card is
registered (Primary or Alternate)
when the next re-registration attempt will occur
���valuesfrom the Gatekeeper,such as Time To Live (TTL) and endpoint ID
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright© 2007, Nor tel Networks
.