Access the ITG shell through a maintenance port or Telnet 383
—End—
Restore from the CLI
Torestore configuration when the TM 3.1 PC is not available to retransmit
the IP Trunk3.01 (and later) configuration data, use the appropriate "Put"
commands.
Follow the steps in Procedure 68 "Restoring from the CLI" (page 383) to
perform a restore from the CLI.
Procedure 68
Restoring from the CLI
Step Action
1Use the BootPFileGet command with the appropriate parameters,
to restore the Node Properties file from the FTP host to the IP trunk
card.
2Log in to the ITG shell for each IP trunk card that requires a dialing
plan restore. Use the DPAddrPut command with the appropriate
parameters, to backup the dialing plan file from the FTP host, or
from another IP trunk card in the node that has a valid copy of the
dialing plan, to each IP trunk card. Each IP trunk card requires a
valid copy of the dialing plan.
3Log in to the ITG shell for each IP trunk card that requires a Card
Properties restore and use the configFilePut command with the
appropriate parameters, to restore the IP trunk card properties files.
—End—
Recover the SNMP community names
It might be necessary to recover the SNMP community names in the
following situations:
when TM 3.1 cannot display the updated status
to transmit or retrieve data to or from an IPtr unk card because of an
invalid community name in TM 3.1 IP Trunk3.01 (and later)
if the TM 3.1 PC has crashed and had to be restored from scratch.
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21December 2007
Copyright© 2007, Nor tel Networks
.