Cabling for the Media Card 32-port trunk card 213
2Fit the screw through the secondary side of the Media Card 32-port
trunk card into the threaded hole in the bracket and tighten.
3Fit the DCHIP PC Card NTMF29BA cable assembly through the
faceplate slot and push it home into the header.
4Fit the DCHIP PC Card connector of the NTMF29BA cableassembly
into Port 0 (the upper socket) on the DCHIP card.
5Fit the clamp over the PC Card connector and into the bracket.
Ensure that the cable is fitted through theclamp, then secure it to
the bracket with the attached screw.
6Make sure the eject button protrudes when the card is fully inserted.
Do not use excessive force when inserting the DCHIP PC Card.
—End—
DCHIP cable routing, Large SystemsNTMF29BA/NTND26AA cable routing
The NTND26AA cable from the MSDL forms a direct flying lead connection
to the NTMF29BA cable from the DCHIP card. The cables must be routed
internally to the system along the cabling channels, as shown in Figure 46
"Large System DCHIP cabling setup: intra-column/cube" (page 214). The
NTND26 cable is available in various lengths.
Nortel Communication Server 1000
IP TrunkFundamentals
NN43001-563 02.01 Standard
Release 5.5 21December 2007
Copyright© 2007, Nor tel Networks
.